Cascade Sciences CVO-2, Руководство по установке и эксплуатации

Страница: 43 / 52

43 | P a g e
cascadesciences.com | Tel. 503 847-9047
OPERATION
P
AUSING
H
EATING
To pause the oven heating, press and hold the Hold button for approximately 2 seconds.
•
The Temperature display screen will change to show HLd.
•
The oven will cease heating.
Resuming Heating
Press and hold the Hold button for approximately 2 seconds.
•
The Temperature display will resume showing the current oven chamber temperature.
•
The oven will resume heating if the chamber temperature is lower than the temperature
setpoint.
O
VER
T
EMPERATURE
A
CTIVATION
Possible causes of Over Temperature Limit Activation:
•
A heat source in the oven chamber is pushing the oven temperature above
the limit setting.
•
Significant outgassing in the chamber may be interfering with the measured
temperature.
•
Attempting to heat a significant mass of product or samples may trigger a
temperature overshoot and subsequent Limit cutoff.
•
The oven temperature controller circuitry or sensor probe have failed.
If you suspect an ignition event in the oven chamber or a hardware failure wait for the oven to
cool to room temperature before opening chamber door. Contact Technical Support for
assistance.
Temperature Hold: The oven will not heat
HOLD