Cascade Sciences CVO-2, Руководство по установке и эксплуатации

Страница: 21 / 52

21 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
I
NSTALLATION
P
ROCEDURE
C
HECKLIST
For installing the oven in a new workspace location.
Pre-Installation

Verify a vacuum supply source suitable for your application is available and
can be connected to the oven, page 14.
•
See page 28 for the oven gas and vacuum port locations.

Check that the required ambient conditions for the unit are met, page 22.

Check that the spacing clearance requirements are met, page 22.
•
Unit dimensions may be found on page 10.

Check that a suitable electrical outlet and power supply is present, page 23.
Install the oven in a suitable workspace location

Review the lifting and handling instructions, page 25.

Install the leveling feet, page 25.

Install the oven in its workspace location, page 26.
Set up the oven for use

Clean the oven shelving. Clean the chamber if needed, page 26.

Install the shelving, page 27.

Connect the vacuum supply to the oven, page 28.

Optional : Connect the oven to an inert backfilling gas, page 29.