9
CV072018-1
Dehumidif.On/Off It is active if the control is configured to manage the dehumidification system
- on dehumidification enabled
- off dehumidification disabled.
DWat. NoFrost Off\On
It is active if the control is configured to manage the dehumidification system Air temperature after the cold coil
in ° C.
It is active if after treatment is established by water coil. Indicates whether anti-freeze / - nofrost mode measured
by on-off thermostat (directed at 1 ° C and connected to a digital input) is in progress. In this case, the control valve
opens completely and both fans stop. At the same moment an alarm appears in the corresponding menu.
Td(Dehum.)
It is active if the control is configured to manage the dehumidification system Air temperature after the cold coil
in ° C.
The digital inputs / outputs can be programmed from the factory menu by asking the manufacturer for passwords and instructions on the
available functions.
PROGRAM MENU: WEEKLY PROGRAMMING MANAGEMENT
This menu allows to manage the speed of the fans (in three levels) that are expressed in percentage for machines of variable speed, in pascals
for machines of constant pressure and in m3 / h for machines of constant flow. It is also possible to enable / inhibit air after-treatment (if pre-
sent) in a different way for each day of the week.
Everything can be adjusted for different time slots (from 1 to 8 definable by the user with a resolution of 30 minutes). To access the program-
ming management functions, select Program with the direction buttons pointing to it and press OK.
Program menu display with fan speed
Program menu display with air low
Program menu display with pressure
