6 - CCN COMPATIBILITY
30GX&HX Pro-Dialog
4
Control is compatible with:
w
The Building Supervisor
w
The Network Service Tool
30GX&HX Pro-Dialog
4
Control is compatible with the following POCs:
w
Alarm POC II
w
Autodial Gateway II
w
Data Transfer/Collection History
w
Dataport 1
w
Dataport 2
w
SAM
w
NDS
w
CCN/JBUS Gateway
w
Flotronic System Manager
w
Chiller SYstem Manager III
7 - PRO_DIALOG 4 DOWNLOADER ADDENDUM INFORMATION
The pro_dialog 4 control software shall be downloaded using the downloader version 3.0 or later. Here is the
example of the downloader list (download.lis) which contains only pro_dialog 4 controls :
CESR208410-22 PD4 Global chiller GX & HXC SR 2.2 (1)
CESR208400-22 PD4 Recip chiller 30 GK & 30HZ V2 SR 2.2 (1)
CESRNRCP53-10 NRCP PD4 SLAVE ADDRESS 53 version 1.0 (2)
CESRSCPM10-60 PD4 SCPM board download SR 1.06 (2)
1. Software can be downloaded through CCN bus or through SIO bus
2. Software shall only be downloaded through SIO bus.
Before downloading the software, use the reset command to erase the old software. Once F2 key is pressed, turn
off and on quickly the power supply of the board, the message «Hard restart command successful !».
Then go to the downloader , Select download, software and then press F2 to download the software as usual.
The «CESRNRCP53-10» shal be used for Aquasnap basic board download when cooler heater and reclaim option
are selected.
CARRIER SA
USER'S GUIDE FOR
30GX&HX PRO_DIALOG 4 V.2
ECG-UG-02-002
Rev: Original
Page: 60/98
©
C
ARRIER
S
.
A
NOT
TO
BE
DISCLOSED
TO
PERSONS
OUTSIDE
CARRIER
ORGANIZATION
Downloaded from
www.Manualslib.com
manuals search engine