![background image](http://html1.mh-extra.com/html/carrier/opn-mtcc/opn-mtcc_installation-and-start-up-instructions-manual_2562501001.webp)
Manufac ture r re s e rve s the rig ht to dis c o ntinue , o r c hang e at any time , s pe c ific ations o r de s ig ns witho ut no tic e and witho ut inc urring o blig atio ns .
Ca ta log No.18-OP NMTCC-001
P rinte d in U.S .A.
Form OP N-MTCC-3S I
P g 1
02-18
Re pla ce s : OP N-MTCC-2S I
Installation and Start Up Instructions
CONTENTS
Page
SAFETY CONSIDERATIONS
. . . . . . . . . . . . . . . . . . . 1
OVERVIEW
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
COMPONENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Step 1 — Mounting the Cabinet
. . . . . . . . . . . . . . . . 2
Step 2 — Main Power Connection 115V 1P 60Hz
. 3
Step 3 — Toshiba Carrier VRF System
Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 4 — Connect the i-Vu Open Link to the i-Vu
Server
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 5 — Powering on the Unit
. . . . . . . . . . . . . . . . . 5
Step 6 — To obtain an IP address using DHCP
. . . 5
Step 7 — Verifying the i-Vu server can
Communicate with the i-Vu Interface
. . . . . . . . . . . 5
MONITOR MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
BAS CONTROL MODE
. . . . . . . . . . . . . . . . . . . . . . . . 20
TROUBLESHOOTING/PRECAUTIONS
. . . . . . . . . . . 21
INDOOR UNIT ADDRESS SETTING
. . . . . . . . . . . . . 21
START-UP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SAFETY CONSIDERATIONS
Improper installation, adjustment, alteration, service,
maintenance, or use can cause explosion, fire, electrical shock,
or other conditions which may cause death, personal injury or
property damage. The qualified installer or agency must use
factory-authorized kits or accessories when modifying this
product.
Follow all safety codes. Wear safety glasses, protective
clothing, and work gloves. Use quenching cloth for brazing
operations. Have fire extinguisher available. Read these
instructions thoroughly and follow all warnings or cautions
included in literature and attached to the unit.
Consult local building codes and the current editions of the
National Electrical Code (NEC) ANSI/NFPA (American
National Standards Institute/National Fire Protection
Association) 70. In Canada, refer to the current editions of the
Canadian Electrical Code CSA (Canadian Standards
Association) C22.1.
Understand the signal words —
DANGER
,
WARNING
, and
CAUTION
.
DANGER
identifies the most serious hazards
which will result in severe personal injury or death.
WARNING
signifies hazards that could result in personal
injury or death.
CAUTION
is used to identify unsafe
practices, which would result in minor personal injury or
product and property damage.
Recognize safety information. This is the safety-alert symbol
(
). When this symbol is displayed on the unit and in
instructions or manuals, be alert to the potential for personal
injury.
WARNING
Electrical shock can cause personal injury and death. Shut off all
power to this equipment during installation. There may be more
than one disconnect switch. Tag all disconnect locations to alert
others not to restore power until work is completed.
WARNING
1.
i-Vu Interface components (OPN-MTCC) are exclusively
designed to be installed in the i-Vu Interface (OPN-MTCC)
controller by Carrier, which is exclusively connected to the
i-Vu/IP Protocol. Do not install this product in any other
products or use this product for any other purposes and/or
protocols without prior written consent.
2.
Do not resell or otherwise transfer this product as a stand-
alone product.
3.
Do not modify or alter this product. Do not try to fix or
repair this Product even if the Controller is in need of repair.
OPN-MTCC
i-Vu Interface
Toshiba Carrier Variable Refrigerant Flow (VRF)
Systems
Содержание OPN-MTCC
Страница 7: ...7 Fig 9 Technician Tool ...