manualshive.com logo in svg

Carrier AQUASMART 30EV Series, Установка, эксплуатация и обслуживание

Поделиться
Скачать
Carrier AQUASMART 30EV Series Скачать руководство пользователя страница 53

53

1.  To   dismantle   the   fan, it   is   necessary   to remove   

the   protective cover   in   the     Flying   Bird propeller, 
to allow    access   to   the screw   that   attaches   the 
propeller   to   the motor shaft.     

2.  Complete assembly is understood by motor support, 

motor, propeller, panel, duct and air discharge grille.

  WARNING

6.8.  Switchboard

a) General Notes

   The unit switchboard has been designed to simplify 

inspection and maintenance services.

    You can access the switchboard by removing its closing 

panel (see section) and the drive and protection elements 
of the equipment are located there.

For Units  30EX/30EV

The 30EX and 30EV units off er the highest technology in 
actuating and protecting the system, as well as chiller water 
outlet temperature control.

The 30EV units have the Inverter compressor that provides a 
smooth start and the right consumption according to need.

The power cabinet has a power plug and a grounding 
point for powering the machine. The control is carried out 
through the communication terminal and a 12VDC control 
(with its own protocol) is used to turn on the system or 
monitor the parameters.

Through software routines, the drives off er protections that 
extend the life of all electrical / electronic components. 

6.7.  Lubrication

Motors

Electric motors have bearings with permanent lubrication, 
requiring no additional lubrication.

Compressors

The compressors have their own oil supply (see Table 2 - 
General Technical Specifi cations). 

Units 30EX / 30EV

The fi xed units (30EX) are lubricated with Copeland Ultra 
22cc oil, recommended for cooling systems with R410-A. The 
Inverter units (30EV) operate with Daphne Hermetic FVC 68d 
lubricants used for commercial cooling or air conditioning 
systems. Compatible with HFC refrigerants containing anti-
oxidant additives and anti-abrasive agents.

CAUTION

DO NOT WASH THE FRONT OF THE MACHINE 

WITH A PRESSURIZED WATER JET

FIG. 26 - Cleaning care

b) Pressure switches

 

The low and high pressure switches are of the miniaturized, 
automatic reset type, and are directly coupled to the 
suction and discharge lines respectively. 

Содержание AQUASMART 30EV Series









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды