Carrier 39HXC, Руководство пользователя

Страница: 59 / 64

8.6 - Communication parameters
No. Description
Setting
Display conditions
Access
level
Enumeration By default
BMS1
700 Selection of the type of communication
protocol used on the BMS1 port
0: None
1: MODBUS RTU
2: LON
3: KNX
4: MODBUS TCP
5: BACNET IP
6: WEB
0 2
701 Selection of the transmission speed on the
BMS1 port
0: 1200
1: 2400
2: 4800
3: 9600
4: 19200
3 if P700=1 or 3
2 if P700=2
4 if P700=4, 5 or 6
P700 = 1 2
702 Parity on the BMS1 port
0: without
1: even
2: odd
0 P700 = 1 2
703 Number of stop bits on the BMS1 port 1 P700 = 1 2
705 Selection of the controller address on the
BMS1 bus
1 P700 = 1 2
706 Control type
0: Local
1: Remote
0 2
port
710 Selection of the type of communication
protocol used on the BMS2 port
1: ModBus RTU 0 2
711 Selection of the transmission speed on the
BMS2 port
0: 1200
1: 2400
2: 4800
3: 9600
4: 19200
3 2
712 Parity on the BMS2 port
0: without
1: even
2: odd
0 2
713 Number of stop bits on the BMS2 port 1 2
715 Selection of the controller address on the
BMS2 bus
1 2
716 Control type
0: Local
1: Remote
0 2
pLAN
720 pCO address on the pLAN network 1
8.7 - Calibration
No. Description
Setting
Unit Display conditions
Access
level
Min. Max.
800 Calibration of the air intake fan flow rate sensor 3
801 Calibration of the air extraction fan flow rate sensor 3
802 Intake duct pressure sensor calibration
P104 Air intake ventilation control =
Duct pressure
3
803 Exhaust duct pressure sensor calibration
P104 Intake ventilation control =
Duct pressure
and
P105 Exhaust ventilation control =
Duct pressure
3
804 Intake filter differential pressure 3
805 Exhaust filter differential pressure 3
808 Supply air duct temperature sensor calibration -5.0 5,0 °C Sensor present 3
809 Internal supply air temperature sensor calibration -5.0 5,0 °C 3
810 Calibration of fresh air temperature sensor -5.0 5,0 °C 3
811 Return air temperature sensor calibration -5.0 5,0 °C 3
813 Calibration of the room air temperature sensor -3.0 3,0 °C
P149 = with in read-only, modifiable
from Th-Tune
3
814 Calibration of the heat recovery unit outlet
temperature sensor, intake side
-3,0 3,0 °C
P38 Temperature sensor upstream of
heat recovery unit = With
3
816 Calibration of CO
2
Air Quality sensor -200 200 ppm P149 Air quality control = With 3
817 Heat recovery unit DP pressure sensor calibration
P37 Differential pressure sensor on the
heat recovery unit = With
3
8 - PARAMETERS
59