CARQON D2, Руководство пользователя

Страница: 30 / 64

30
To increase the assistance level, press the + button (12) on the operating unit repeatedly until the
required assistance level appears on indicator (b). To decrease the assistance level, press the – button
(11). The requested motor output is displayed in the indicator (a). The maximum motor output depends
on the selected assistance level. When the on-board computer is removed from the holder (4), the
assistance level that was last displayed is saved; the motor output indicator (a) remains empty.
5.3.3 Switching bike lights on/off
The front and rear lights can be switched on and off at the same time via the on-board computer with
button (2). When the lighting is switched on, <Lights on> appears and when the lighting is switched off,
<Lights off> appears for about one second on the text indicator (d). The lighting symbol (c) is displayed
when the light is on. The on-board computer saves the light status and activates this saved status
accordingly after a restart. Switching the bike light on and off has no effect on the back lighting of the
display. The front of the box of your Carqon is equipped with LED-light. This is an extra LED-light,
which is switched on automatically when the frontlight is activated.
5.3.4 Switching the push walk assistance on/off
The push walk assistance helps you to push your Carqon while walking with the bike in your hands. The
speed in this function depends on the selected gear and can reach a maximum of 6 km/h. The lower
the selected gear, the lower the speed of the push walking assistance function (at full power). The push
walking assistance function must only be used when pushing the Carqon. There is a risk of injury if
the wheels of the Carqon are not in contact with the ground while using the push walking assistance.
To activate the push walking assistance, briefly press the walk button (13) on your onboard computer.
After activation, press the + button within 3 s and keep it pressed during the time you need support
while walking.
Note: The push walking assistance cannot be activated at assistance level OFF.
The push walking assistance is switched off as soon as one of the following occurs:
● You release the + button.
● The wheels of the Carqon are locked (e.g. by applying the brakes or hitting an obstacle).
● The speed exceeds 6 km/h. The push assistance function is subject to local regulations; the way
it works may therefore differ from the description above, or the function may even be deactivated
completely.
Warning : Don‘t use the push walking assistance longer than necessary. By using it
for an unnecessary long term, the drive system might overheat.