CARQON D2, Руководство пользователя

Страница: 31 / 64

31
5.3.5 Battery charge indicator
The battery charge indicator (i) displays the state of charge of the bike’s battery, not that of the on
board computer’s internal battery. The state of charge of the battery can also be checked on the LED’s
of the battery itself. Each bar of the battery symbol on the indicator (i) represents approximately 20 %
of the capacity:
The battery pack is fully charged.
The battery pack should be recharged.
The LEDs of the battery charge indicator on the battery go out.
Once the capacity for assisting the drive has been used up, the assistance is gently switched off. The
remaining capacity is still available for the lighting and the onboard computer, the indicator flashes. The
remaining capacity of the e-bike battery is enough for about two hours of lighting. This does not account
for other consumers (e.g. automatic gearbox, charging external devices at the USB port). If the on-board
computer is removed from the holder (4), the last displayed state of charge of the battery is saved. If your
Carqon is powered by two batteries, the battery charge indicator displays the state of charge of both
batteries.
5.3.6 Placing and removing the on-board computer
To place the on-board computer (3), slide it forwards into the holder (4). To remove the onboard
computer (3), press the locking mechanism (1) and slide the on-board computer forwards out of the
holder (4).
The on-board computer can be secured in place to prevent it from being removed from the holder. To
do so, remove the holder (4) from the handlebars. Put the onboard computer in the holder. Screw the
locking screw (M3 thread, 8 mm long) from below into the thread provided in the holder. Mount the
holder back onto the handlebars. Note: The locking screw is not designed to prevent theft but just as a
useful smart trick.