CARQON D2, Руководство пользователя

Страница: 34 / 64

34
5.4.4 Switching the push walking assistance on/off
The push walk assistance helps you to push your Carqon. The speed in this function depends on the
selected gear and can reach a maximum of 6 km/h. The lower the selected gear, the lower the speed
of the push walking assistance function (at full power). The push walking assistance function must only
be used when pushing the Carqon. There is a risk of injury if the wheels of the Carqon are not in contact
with the ground while using the push walking assistance. To activate the push walking assistance,
briefly press the walk button (2) on your onboard computer. After activation, press the + button within
3 s and keep it pressed.
Note: The push walking assistance cannot be activated at assistance level OFF.
The push walking assistance is switched off as soon as one of the following occurs:
● You release the + button;
● The wheels of the Carqon are locked (e.g. by applying the brakes or hitting an obstacle);
● The speed exceeds 6 km/h. The push assistance function is subject to local regulations; the way
it works may therefore differ from the description above, or the function may even be deactivated
completely.
5.4.5 Battery charge indicator
The battery charge indicator (g) displays the state of charge of the bike’s battery, not that of the
onboard computer’s internal battery. The state of charge of the battery can also be checked on the
LEDs of the battery itself. Each bar of the battery symbol on the indicator (g) represents approximately
20 % of the capacity:
The battery pack is fully charged.
The battery pack should be recharged.
The LEDs of the battery charge indicator on the battery go out.
Once the capacity for assisting the drive has been used up, the assistance is gently switched off. The
remaining capacity is still available for the lighting and the onboard computer, the indicator flashes. The
remaining capacity of the e-bike battery is enough for about two hours of lighting. This does not account
for other consumers (e.g. automatic gearbox, charging external devices at the USB port). If the on-board
computer is removed from the holder (4), the last displayed state of charge of the battery is saved. If your
Carqon is powered by two batteries, the battery charge indicator displays the state of charge of both
batteries. Note: The indicator and LEDs give an indication, not an exact percentage.
Warning : Don‘t use the push walking assistance longer than necessary. By using it
for an unnecessary long term, the drive system might overheat.