Carl Valentin Compa II 103/8 T, Краткое руководство пользователя

Страница: 102 / 214

Compa II
102 English
Unpack the Label Printer

Lift the label printer out of the box.

Check the label printer for transport damages.

Check delivery for completeness.
Scope of Delivery
•
Label printer.
•
Empty core, mounted on transfer ribbon rewinder.
•
Tear-off edge (basic printers only).
•
Dispensing edge (printers with dispenser option only).
•
Power cable.
•
Documentation.
•
Printer driver CD.
•
Labelstar Office LITE.
NOTICE!
Retain original packaging for subsequent transport.
Set Up the Label Printer
CAUTION!
The label printer and the print media can be damaged by moisture and water.

Set up the label printer only in a dry place protected from sprayed water.

Set up the label printer on a level, vibration-free and air draught-free surface.

Open the cover of label printer.

Remove the foam transportation safeguards near the printhead.
Connect the Label Printer
The printer is equipped with a versatile power supply unit. The device may be operated with a mains voltage of
110 … 230 V AC
– 50/60 Hz without any adjustments or modifications.
CAUTION!
The label printer can be damaged by undefined switch-on currents.

Set de power switch to '0' before plugging in the label printer.

Insert the power cable into power connection socket.

Insert the plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the label printer are grounded.

Connect label printer to computer or network with a suitable cable.
Initial Operation of the Label Printer

After all connections are completed, switch on the label printer.
The main menu appears which shows the printer type, current date and time.

Insert the label material and the transfer ribbon.

Start measuring in menu Label layout/Measure label .

Press the key to finish measuring.
NOTICE!
To enable correct measuring, at least two completed labels have to be passed through (not for continuous labels).
During measuring the label and gap length small differences can occur. Therefore the values can be set manually in menu
Label layout/Label and Gap .