Carl Valentin Compa II 103/8 T, Краткое руководство пользователя

Страница: 98 / 214

Compa II
98 English
Intended Use
•
The label printer is a state-of-the-art device which complies with the recognized safety-related rules and regulations.
Despite this, a danger to life and limb of the user or third parties could arise and the label printer or other property co uld be
damaged while operating the device.
•
The label printer may only be used while in proper working order and for the intended purpose. Users must be safe, aware
of potential dangers and must comply with the operating instructions. Faults, in particular those which affect safety, must
be remedied immediately.
•
The label printer is solely intended to print suitable media which have been approved by the manufacturer. Any other or
additional use is not intended. The manufacturer/supplier is not liable for damage resulting from misuse. Any misuse is at
your own risk.
•
Intended used includes heeding the operating manual, including the maintenance recommendations/regulations specified
by the manufacturer.
Safety Notes
•
The label printer is designed for power supply systems from 110
… 230 V AC. Connect the label printer only to electrical
outlets with a ground contact.
•
Couple the label printer to devices using extra low voltage only.
•
Before making or undoing connections, switch off all devices involved (computer, pr inter, accessories etc.).
•
Operate the label printer in a dry environment only and do not get it wet (sprayed water, mist etc.).
•
Maintenance and servicing work can only be carried out by trained personnel.
•
Operating personnel must be trained by the operator on the basis of the operating manual.
•
If the label printer is operated with the cover open, ensure that clothing, hair, jewellery and similar personal items do not
contact the exposed rotating parts.
•
The print unit and parts of it (e.g. printhead) can get hot during printing. Do not touch the printhead during operation. Cool
down the print unit before changing material, removal or adjustment.
•
Never use highly inflammable consumables.
•
Carry out only the actions described in these operating instructions. Any work beyond this may only be performed by the
manufacturer or upon agreement with the manufacturer.
•
Unauthorized interference with electronic modules or their software can cause malfunctions.
•
Other unauthorized work or modifications to the direct print module can endanger operational safety.
•
Always have service work done in a qualified workshop, where the personnel have the technical knowledge and tools
required to do the necessary work.
•
There are warning stickers on the direct print modules that draw your attention to dangers. Therefore the warning stickers
are not to be removed as then you and others cannot be aware of dangers and may be injured.
DANGER!
Danger to life and limb from power supply!

Do not open the casing.
NOTICE!
For Norway and Sweden.
Devices which are attached via a power connector with a connection to safety earthing to the safety earthing of
the electric equipment of the building and to a cable distribution system with coaxial cables can cause fire risks
under certain circumstances. Therefore the connection with a cable distribution system must be made by a device
which provides an electric insulation underneath a specific frequency range.
Environmentally-Friendly Disposal
Manufacturers of B2B equipment are obliged to take back and dispose of old equipment that was manufactured after 13 August
2005. As a principle, this old equipment may not be delivered to communal collecting points. It may only be organised, used a nd
disposed of by the manufacturer. Valentin products accordingly labelled can therefore be returned to Carl Valentin GmbH.
This way, you can be sure your old equipment will be disposed of correctly.
Carl Valentin GmbH thereby fulfils all obligations regarding timely disposal of old equipment and facilitates the smooth reselling
of these products. Please understand that we can only take back equipment that is sent free of carriage charges.
The electronics board of the printing system is equipped with a battery. This must only be discarded in battery collection
containers or by public waste management authorities.
Further information on the WEEE directive is available on our website www.carl-valentin.de.