CARDIOSTRONG CST-BX60, Руководство по сборке и эксплуатации

Страница: 14 / 52

BX 60
14
Step 2: Assembly of the front supporting foot
(1) Remove the pre-
mounted screws (J1),
spring washers (J2) and
washers (J3) from the
front supporting foot
(B).
(2) Mount the front
supporting foot (B)
on the main frame (A)
using the screws (J1),
spring washers (J2) and
washers (J3).
(3) Use a 5 mm Allen key
to tighten the screws.
Step 3: Assembly of the handlebar post
Note:
It may be helpful to have extra
assistance when connecting the cable and
stabilising the handlebar post (D).
(1) Put cable (A1) and cable (D1) in place
and connect together. Make sure that you
connect the cables correctly.
Note: Take care not to bend the cables when
you connect the handlebar post (D) to the
main frame (A).
(2) Hold the handlebar post (D) in place
against the main frame (A) and connect
them together using the screws (J4) and the
washers (J5).
(3) Use a 6 mm Allen key to tighten the screws
(J4).
(4) Put the plastic cover (D2) on the handlebar post (D) and connect them together
using the clip under the plastic cover (D2).
Tools required: 6 mm Allen key