CARDIOSTRONG CST-BX60, Руководство по сборке и эксплуатации

Страница: 15 / 52

BX 60
15
Step 4: Assembly of the front handlebar
(1) Remove the nuts (J6) and the washers
(J7) from the handlebar post (D).
(2) Connect the handlebar assembly (E) to
the handlebar post (D) using the nuts (J6)
and washers (17).
Note: Pull the cable (D1) and the cable
for the hand pulse sensors through the
mounting hole on the handlebar set (E).
Take care not to bend the cable.
(3) Use a 13 mm spanner to tighten the nuts
(J6).
Assembly of the bottle holder
(1) Remove the screws (18) from the
handlebar post (D).
(2) Using a screwdriver, secure the bottle
holder (L1) to the handlebar post (D) using
the screws (J8).
Tools required: # 13 Allen key, screwdriver