CanyCom SC75 Скачать руководство пользователя

Страница: 58 / 73

-49-

Maintenance

Control Stick

1. Start the engine and increase the engine

speed by moving the throttle lever to
[ (fast)] position.

2. Operate the machine on a level surface and

release the control stick; if the track moves
forward or backward, the control stick needs
to be adjusted.

3570M-0507-150E

Lock Nut (A)

Rod End (C)

Rod (B)

• Control stick is properly adjusted at the time of shipment. Adjustment is needed

only when the transmission, the control stick itself, or its linkage is replaced or
dismantled.

NOTE

Inspecting

3. Remove the back panel and the control rod

cover. (Page 35, 36)

4. Loosen the lock nuts (A).
5. Rotate the rod (B) until the right track does

not move.

- When the track moves forward, turn the rod
so that the distance between the rod ends
(C) becomes longer.

- When the track moves backward, turn the
rod so that the distance between the rod
ends (C) becomes shorter.

6. Tighten the lock nuts (A) securely.

Adjusting - When the Right Track Moves

Содержание SC75










































































Результаты поиска

Содержание SC75

Отзывы:

Похожие инструкции для SC75

Бренды по названию

Популярные бренды

CanyCom SC75, Руководство оператора

Результаты поиска

Содержание SC75

Отзывы:

Похожие инструкции для SC75

Бренды по названию

Популярные бренды