CanyCom SC75 Скачать руководство пользователя страница 50

Страница: 50 / 73

-41-

Maintenance

Drive Train

• Stop the engine when servicing the drive train.

• Allow the machine to cool off before servicing. The engine is very hot after

operation and may pose a burn hazard.

Tracks

1. Hoist one side of the machine so that the

machine is laterally parallel to the ground.

(Page 63)

2. Inspect the clearance between the track and

the second wheel to be between 20 and
30mm (0.79" - 1.18"). Adjust the tracks if the
clearance is not within this range.

3. Lower the machine.

Inspecting

• Support the machine securely on a firm, level surface with jack stands when

servicing.

• Make certain to adjust the track tension properly. Inproperly tensioned tracks

may wear or come off, resulting in property damage, serious injury or death.

3570M-0507-010E

20 - 30mm (0.79" - 1.18")

Lock Nut

Adjust Bolt

Swing

• The track stretches during its use-life. Inspect and adjust regularly.

NOTE

Содержание SC75










































































Результаты поиска

Содержание SC75

Отзывы:

CanyCom SC75, Руководство оператора, Страница: 50 / 73

Результаты поиска

Содержание SC75

Отзывы: