CanyCom SC75 Скачать руководство пользователя страница 34

Страница: 34 / 73

-25-

Operation

2. Turn the lock plate on the dump lever to the

side so that the dump lever can be moved.
Dump pedal is linked to the dump lever.

3. Step lightly on the dump pedal (up) to raise

the bucket.

4. When the bucket reaches its upper limit, a

hissing noise is heard; release the pedal.

Lowering the Bucket with Dump Lever

3570M-0403-030E

Dump Pedal (Up)

3570M-0403-040E

Dump Lever

Lock Plate

3570M-0403-050E

Dump Pedal (Down)

Raising the Bucket with Dump Pedal

5. Move the dump lever gradually toward

[ (down)] to lower the bucket.

6. When the bucket reaches its lower limit, a

hissing noise is heard; move the dump lever
back to [ (neutral)] position.

7. Turn the lock plate back in place to lock the

dump lever.

5. Step lightly on the dump pedal (down) to

lower the bucket.

6. When the bucket reaches its lower limit, a

hissing noise is heard; release the pedal.

7. Turn the lock plate back in place to lock the

dump lever.

Lowering the Bucket with Dump Pedal

Содержание SC75










































































Результаты поиска

Содержание SC75

Отзывы:

CanyCom SC75, Руководство оператора, Страница: 34 / 73

Результаты поиска

Содержание SC75

Отзывы: