CanyCom SC75 Скачать руководство пользователя страница 39

Страница: 39 / 73

Maintenance

-30-

Item

Description

Schedule

Note

PSI

Mon

Year

Drive T

rain

Drive Belts

Belt tension shall be properly adjusted.

√ √

Inspecting/Adjusting:
Page 46

Belt shall be free of damages, excessive
wear, or dirt; shall be free of oil or grease.

√ √

Transmission

Irregular noise or overheating shall not be
observed.

√ √ √

Oil shall be clean and filled to a proper level.

√ √

Replacing: Page 44

There shall not be oil leak in or around
transmission.

√ √

HST Pump

Drive the machine forward and backward,
turn left and right in both directions; machine
shall move normally and free of irregular
noise or overheating.

√ √ √

Hydraulic fluid shall be filled to a proper
level.

√ √

Inspecting/Changing:
Page 42

Hydraulic fluid shall be clean and free of dirt
or contamination.

√ √

Inspecting/Changing:
Page 42

There shall be no fluid leak in or around fluid
tank.

√ √

Linkage

Rods, links, and wires in linkage shall be free
of deformation or damage.

√ √

Connections shall be free of looseness,
excessive play, or missing cotter pins.

√ √

Undercarriage

W h e e l s
S p r o c k e t s
Idlers

Shall be free of cracks, defromation, or
excessive wear.

√ √ √

There shall not be excessive play in axle.
Irregular noise or overheating shall not be
observed when traveling.

√ √ √

Mounting bolt or nut shall not be loose or
missing.

√ √ √

There shall be no oil leak in or around axle.

√ √

Tracks

There shall not be marked cut, deterioration,
or wear.

√ √ √

Track shall be properly tensioned; shall not
be too loose or too tight.

√ √ √

Adjusting: Page 41

Tension bolt shall be free of deformation or
corrosion.

√ √ √

Содержание SC75










































































Результаты поиска

Содержание SC75

Отзывы:

CanyCom SC75, Руководство оператора, Страница: 39 / 73

Результаты поиска

Содержание SC75

Отзывы: