manualshive.com logo in svg

CanyCom SC75, Руководство оператора, Страница: 53 / 73

Поделиться
Скачать
CanyCom SC75 Скачать руководство пользователя страница 53

Maintenance

-44-

5

1.  Park the machine on a level ground.
2.  Lift the bucket and hold the bucket with the 

safety prop. (Page 26) Lock the dump lever 
with lock plate.

3.  Remove the front panel. (Page 36)
4.  Undo the bolts and remove the suction filter 

mount.

3570M-0507-050E

Suction Filter

Mount

 • Replace both the line filter cartridge and the suction filter element when hydraulic 

fluid is changed.

NOTE

Changing Suction Filter

Transmission Oil

 • Always park the machine on a level surface and block the tracks with chocks 

when working under the machine.

 • Replace both the line filter cartridge and the suction filter element when hydraulic 

fluid is changed.

 • Do not use the filter wrench when tightening the filter cartridge. Tighten it by hand.

NOTE

5.  Unfasten the suction filter with a wrench and 

install a new filter. Tighten it securely.

6.  Coat the O-ring with hydraulic fluid evenly 

and insert the suction filter mount inthe tank. 
Make sure to insert it straight so that the 
O-ring does not get out of the groove. Fasten 
the suction filter mount with bolts.

7.  Install the front panel. (Page36)
8.  Undo the safety prop. Lower the bucket.

3570M-0507-180E

Suction Filter

O-ring

Содержание SC75










































































Отзывы:

Нет отзывов