manualshive.com logo in svg

CanyCom SC75, Руководство оператора, Страница: 47 / 73

Поделиться
Скачать
CanyCom SC75 Скачать руководство пользователя страница 47

Maintenance

-38-

5

1.  Remove the oil filler cap.
2.  Follow the instructions in the 

Operator's 

Manual for the engine

 to fill oil.

3.  Check oil level.
4.  Put the oil filler cap back in place and tighten 

it securely.

Filling

1.  Have an appropriate oil drain pan.
2.  Remove the drain plug to drain oil.
3.  Put the drain plug back in place and tighten it 

securely.

4.  Fill oil.

Changing

3570M-0506-030E

Oil Filler Cap

 • 

Oil Capacity: 1.4L(1.48US qts.) [1.55L 

(1.64 US qts.) when changing the oil filter 
cartridge.

 • Removing the oil filler cap helps drain oil 

faster.

3570M-0506-020E

Upper Limit

Lower Limit

3570M-0506-040E

Drain Plug

 • 

To obtain correct reading, check oil level 
before starting, or wait about 10 minutes 
after stopping the engine to allow oil to 
drain back to the oil pan.

 • 

Always check oil level on a level surface.

NOTE

3.  Pull out the dip stick. Wipe oil off of the 

dipstick with clean cloth.

4.  Insert the dipstick and pull it out again.
5.  Check oil level. Oil level should be between 

the two dimples indicating the upper and 
lower limits. If the level is low, fill oil.

6.  Visually inspect oil. If oil is dirty or its 

viscosity is not normal, change it.

NOTE

Содержание SC75










































































Отзывы:

Нет отзывов