CanyCom SC75 Скачать руководство пользователя страница 41

Страница: 41 / 73

Maintenance

-32-

Item

Description

Schedule

Note

PSI

Mon

Year

Hydraulic System

H y d r a u l i c
Cylinder

Shall work smoothly.

√ √

There shall be no leak when extending and
contracting cylinder.

√ √

Extend cylinder fully under load and hold.
Stroke shall be within the range specified by
manufacturer.

√

Cylinder tube and rod shall be free of dents,
cracks, bends, or scratchs.

√ √

Cylinder mounting pins shall be free of
damages or excessive wear.

√ √

Body

, Chassis, Loading Deck

C h a s s i s
Frame

Shall be free of cracks, deformation, or
corrosion.

√ √

Fastening bolts or nuts shall not be loose or
missing.

√ √

Body Panels

Shall be free of cracks or deformation.

√ √

Doors shall open, close, and lock properly.

√ √ √

Fastening bolts or nuts shall not be loose or
missing.

√ √

Loading Deck
Bucket

Loading deck shall be raised and lowered
smoothly.

√ √

Shall be free of cracks, deformation, or
corrosion.

√ √

Fastening bolts or nuts shall not be loose or
missing.

√ √

Safety Prop

Safety prop shall be free of any deformation.

√ √

Labels

Warning labels and instruction plates shall
be clean, legible, and free of damages.

√ √ √

Safety Devices

Work Lamp

Work lamp shall work.

√ √ √

Lamp lens shall be free of cracks or chipping
and water shall not be in the lamp.

√ √

Horn

Horn shall work.

√ √ √

Содержание SC75










































































Результаты поиска

Содержание SC75

Отзывы:

CanyCom SC75, Руководство оператора, Страница: 41 / 73

Результаты поиска

Содержание SC75

Отзывы: