Safety
1
-7-
• With a load, drive the machine forward up a slope (operator's step downhill) when
climbing, and drive it backwards when going down a slope. Be especially cautious
when operating on a slope with a load.
• When driving down a slope, use the control stick so that the machine travels down
at the minimum speed. Use the engine speed to help keep the machine speed low.
Loading and Driving with a Load
• The maximum payload for this machine is 1650lbs. (750 kg). Do not exceed this
maximum payload under any circumstance.
• Do not operate on a slope steeper than 20 degrees when carrying a load. Do not
carry more than 660lb (350 kg) when operating on a slope between 15 and 20
degrees. Keep in mind that liquid concrete will shift in the bucket and hence its
center of gravity also shifts, affecting the stability of the machine.
• Load cargo in the bucket so the weight is evenly distributed. Keep in mind that
liquid concrete will shift in the bucket and hence its center of gravity also shifts.
When carrying a solid cargo, strap the cargo to the load deck to prevent the cargo
from shifting. Ensure that cargo does not obstruct the operator's field of view.
• When carrying a load, drive at a reduced speed. Allow a greater distance for
braking.
• Before crossing a bridge or an overpass, make certain that the total combined
weight of the machine, the load and the driver is within the stated weight limit for
the bridge or the overpass. Then, proceed carefully and at a constant speed.
Dumping
When dumping material from the bucket, take the following precautions.
• Always follow the proper procedures for dumping as described in this manual.
• Only operate the bucket with the engine running.
• Perform the dump operation on a flat, level and stable surface whenever possible.
Raising or lowering the load deck on a slope or rough terrain could result in a tip
over.
