CanyCom CM 2103 Скачать руководство пользователя

Страница: 61 / 62

Transporting

- 55 -

5314M-1000-010E

10. Transporting This Vehicle

When loading and unloading the machine onto or off a truck, follow the procedures below.

Driving

1. Prepare running boards with enough strength to hold both machine and driver's weight, each

boards width at least twice the width of machine’s tire width, length more than three times

longer than truck loading body height, and abrasive surface for traction. Place the boards as

shown below so that the boards will not shift positions when the machine rides on them.

2. Securely hook the running boards to truck so boards are flush with truck's loading bed.

* Keep people away from the machine, truck, and running boards while loading or

unloading the machine.

* Do not turn on the running boards. The machine may drop off the running boards.

* Drive slowly up or down the running boards.

* Beware of tipping when machine crosses from running boards into truck bed.

Содержание CM 2103































































Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды

CanyCom CM 2103, Руководство оператора

Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды