CanyCom CM 2103 Скачать руководство пользователя

Страница: 42 / 62

- 36 -

Maintenance

3. Replace drain plug.
4. Open the oil plug and pour the designated oil into oil part.

7.4.3 Differential Oil and Knuckle Oil

Drain plug

5314M-0704-040E

Differential oil

Lubricating plug

Drain plug

5310M-0704-050E

* Avoid contact with high temperature oil to avoid

burns.

* Dispose of the drained oil properly.

Inspecting Oil

1. Remove the lubricating plug.

2. Visually check oil level and color. When oil level is too low

or oil is dirty, add or change oil.

Oil to be used: See Page 32

3. Replace the lubricating plug.

Replacing Oil

1. Position a suitable container to collect drained oil under

drain plug.

2. Remove the drain plug and drain oil.

Note:

Oil will drain faster after lubricating plug is removed.

3. Replace the drain plug.

4. Open the oil cap and pour oil pour proper amount of

designated oil into oil port.

Drain plug

Knuckle oil

Lubricating plug

5310M-0704-061E

* Avoid contact with high temperature oil to avoid

burns.

* Dispose of the drained oil properly.

Содержание CM 2103































































Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды

CanyCom CM 2103, Руководство оператора

Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды