manualshive.com logo in svg

CanyCom CM 2103, Руководство оператора

Поделиться
Скачать
CanyCom CM 2103 Скачать руководство пользователя страница 13

Rules for Safe Operation and Work

–  7  –

   Precautions on Crumbling Ground

Beware of driving in trenches and on banks.  There is a 
danger of the ground crumbling due to the machine weight.  
When travelling on soft ground, drive slowly and safely.

   Avoid Quick Starting, Acceleration, Turning 

and  Braking

Drive safely and avoid sudden changes of speed or 
direction. Make sure the area around the machine is safe 
for driving.  Do not make sudden maneuvers or turn sharply 
when driving on soft or wet ground; this can cause the 
machine to lose traction or turn over.

   Maintain Safe Speeds

Always drive at a safe speed.

   Do Not Drive Recklessly

Do not operate this machine when under the influence of 
alcohol or drugs, or when fatigued.
No one or under age 18 should operate this vehicle.

Avoid Starting, Accelerating, Turning, or Braking Quickly

CM2-003

CM2-002

CM2-001

CM1-004

Содержание CM 2103































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды