CanyCom CM 2103 Скачать руководство пользователя

Страница: 21 / 62

Operation

- 15 -

Filter

Upper limit of oil level

(Base of filter)

Fuel tank cap

1. Visually check the liquid fuel level in the checking

tube. If fuel is low, open the fuel tank cap, and add

fuel.

Fuel to be used: Gasoline

Fuel tank capacity: 15 liters

2. F

irmly close the fuel tank cap after refueling.

5310M-0601-010E

Lowest grid

Fuel checking

tube

5310M-0601-020E

6.1 Preparation Before Operation

6.1.1 Adding Fuel

6. Operation

Before reading this section, be sure to read Section 3 “Rules for Safe Operation and Maintenance”

(See pages 6-10).

When operating the machine, always follow the instructions in this section. Do not operate the

machine unless you are familiar with the operation of all controls and safety devices.

* When adding fuel, keep open flames (lighted cigarettes, etc.)

away from fuel and engine. Flames will cause the fuel to ignite.

* Always stop the engine before adding fuel.

* Do not overfill so that fuel spills out of filler cap. Wipe up any spilled fuel

before starting engine.

* For best results, add fuel before liquid level in the

fuel checking tube reaches the lowest grid.

* Added fuel should not exceed the upper limit of

the oil level (at base of filter in lubricating port) to

reduce risk of fine.

Operation

Содержание CM 2103































































Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды

CanyCom CM 2103, Руководство оператора

Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды