CanyCom CM 2103, Руководство оператора

Страница: 35 / 62

Maintenance
- 29 -
7. Maintenance
* The chart below includes inspections which require technical knowledge or
special tools and measuring instruments. For difficult inspections, consult the
dealer or a CANYCOM service center.
Maintenance
Item Action Acceptable condition
Timing
Remarks
Pe
r-o
pe
rat
ion
M
on
th
ly
Ye
ar
ly
En
gi
ne
B
od
y
Starting
* Check if engine starts
smoothly and makes
abnormal noise.
Smooth start.
No abnormal noise.
○ ○ ○
Engine speed
* Check if engine speed is
proper at idling and unloaded
maximum speed. Check for
smooth operation.
Proper engine
speed. Smooth and
continuous engine
operation.
○ ○
Please
contact your
CANYCOM
distributor
* Accelerate engine and check
for axle lever drag, engine
stall, and knocking.
No drag, engine stall,
or knocking. ○ ○ ○
Exhaust
* After warming up engine, run
engine from idling to high
speed and check exhaust gas
color and noise.
Normal exhaust gas
color / noise.
○ ○ ○
* Check for gas leak from
muffler, exhaust pipe, etc.
No gas leak.
○ ○
Air cleaner
* Check case for cracks and
deformation, looseness at lid
or connecting pipe.
No cracks or
deformation in case.
No looseness at lid
and pipe.
○ ○
* Check urethane foam paper
element for contamination
and damage.
No severe dirt.
No damage. ○ ○ ○
Cleaning /
Replacement:
(See Page 40)
Tightening
* Check cylinder head and
manifold retaining bolts / nuts
for looseness.
* This check is not necessary if
no gas or water leak is found
at these areas.
No looseness.
○
Valve
clearance
* Check valve clearance.
* This check is not necessary
if no valve-derived abnormal
noise is heard and the engine
operates smoothly.
Proper clearance.
○
Please
contact your
CANYCOM
distributor
7.1 Periodic Inspection Table
* Performing periodic proper inspections and maintenance will improve machine performance,
increase safety, and may help prevent accidents and breakdowns. Perform regular inspections
according to the chart below.
* The regular inspection schedule includes yearly and monthly inspections, and daily
pre-operation checks.