CanyCom CM 2103 Скачать руководство пользователя

Страница: 6 / 62

Notice to Users and Maintenance Personnel

Thank you for purchasing this machine.

Always be sure to read and understand this manual thoroughly before using

your machine. This will enable you to use it correctly.

* The machine can be very dangerous if the safety precautions

in this manual and on the labels attached to this machine

are not followed. Always follow the instructions and safety

precautions or serious injury or death could result.

* This machine is a work vehicle for mowing.
* Do not use it for other purposes. Any other use could be

dangerous.

* driving this machine on a public road or a road regarded as a

public road may be illegal, depending on local regulations.

* Do not modify this machine. Also do not remove the safety

cover of the body before running. A serious accident could

result.

Warning Words Used in This Manual

To indicate the level of danger (or the degree of the failure), the following four signal words are

used to identify the safety messages in this manual. Their meanings are as follows:

Signal word

Meaning

Indicates an imminently hazardous situation which, if not avoided

by following these instructions and precautions, could result in

serious injury or death.
Indicates a potentially hazardous situation which, if not avoided

by following these instructions and precautions, could result in

serious injury or death.
Indicates a potentially hazadous situation which, if not avoided by

following these instructions and precautions, may result in minor

or moderate injury.

This word is used for precautions that are recommended or to

emphasize the importance of information.

Содержание CM 2103































































Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды

CanyCom CM 2103, Руководство оператора

Результаты поиска

Содержание CM 2103

Отзывы:

Похожие инструкции для CM 2103

Бренды по названию

Популярные бренды