Cantek Winic RedLine CT-AP313-IR Скачать руководство пользователя страница 36

Страница: 36 / 45

User Manual of HD-TVI Speed Dome

3.5

Configuring and Handling Alarms

The alarm related function is not supported by the 7-inch IR speed dome.

3.5.1

Configuring Alarm Input and Linkage Actions

Purpose:

This section explains how to configure the speed dome to respond to alarm events with alarm
linked actions, such as calling presets, patrols, patterns, scanning, etc.

Steps:

Move the cursor to enter the alarm configuration submenu:

MAIN MENUS > DOME SETTINGS > ALARM INPUT

ALARM INPUT

RESUME ON

SEQUENCE 5
DELAY TIME 5

ALARM SETTING

BACK EXIT

ALARM SETTING

ALARM NO. 1

  PRIORITY                          HIGH
  LINKAGE                          NONE
  ALARM OUTPUT            NONE
  ALARM INPUT                OPEN

BACK EXIT

Figure 3-20

Alarm Configuration Menu

Choose the alarm number.
(1)

Move the cursor to

ALARM NO.

and click the

IRIS+

to enter edit mode.

(2)

Click the up and down direction buttons to select the number of the alarm which is to be
configured.

(3)

Click

IRIS+

again to confirm and exit edit mode of this column.

You can configure up to 2 alarm inputs.

Move the cursor to

ALARM SETTING

and click the

IRIS+

to enter the setting alarm submenu.

Configure the alarm input.
(1)

Move the cursor to

ALARM INPUT

and click the

IRIS+

to enter edit mode.

(2)

Click the up and down direction buttons to set the input status. You can configure it as

OPEN

(Normally open),

CLOSE

(Normally closed) or

OFF

(disable the alarm input).

(3)

Click

IRIS+

again to confirm.

If you set the status as

OPEN

, alarm will be triggered by high electricity level; if you set the

status as

CLOSE

, alarm will be triggered by low electricity level; if you set the status as

OFF

, it

will be triggered when this input channel is shut off.

Содержание Winic RedLine CT-AP313-IR














































Результаты поиска

Содержание Winic RedLine CT-AP313-IR

Отзывы:

Похожие инструкции для Winic RedLine CT-AP313-IR

Бренды по названию

Популярные бренды

Cantek Winic RedLine CT-AP313-IR, Руководство пользователя

Результаты поиска

Содержание Winic RedLine CT-AP313-IR

Отзывы:

Похожие инструкции для Winic RedLine CT-AP313-IR

Бренды по названию

Популярные бренды