User Manual of HD-TVI Speed Dome
28
Up to 8 timing tasks can be configured.
3.
Set the task status.
(1)
Move the cursor to
ENABLE
TASK
and click
IRIS+
to enter edit mode.
(2)
Click the up/down direction buttons to set the task status to
ON
.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
If the task action and task time have not been configured, you cannot set the status as
ON
.
4.
Configure the task action.
(1)
Move the cursor to
TASK ACT
and click the
IRIS+
to enter edit mode.
(2)
Click the up and down direction buttons to select the task action from preset 1~8, pattern
1~5, patrol 1~10, pan scan, tilt scan, panoramic scan, day mode, night mode, zero calibrate
and none.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
5.
Set the task time.
(1)
Move the cursor to
TASK TIME
and click
IRIS+
to enter edit mode.
(2)
Click the left and right direction buttons to position the cursor to
WEEK
,
START (H-M)
and
END (H-M)
.
(3)
Click the up and down direction buttons to set the start time and end time to run the time
task.
(4)
Click
IRIS+
to confirm the settings and exit.
The weekday can be set to be from
Monday
to
Sunday
or
Whole Week
; the
H
refers to
Hour and the
M
refers to Minute.
WEEK WHOLE WEEK
START(H-M) 00 00
END(H-M) 00 00
IRIS+ OK
IRIS- CANCEL
Figure 3-18
Set the Task Time
6.
Delete the task.
Move the cursor to
TASK CLEAR
, click
IRIS+
to delete the time and action of the current task,
and click
IRIS+
again to confirm the settings and exit.
Содержание Winic RedLine CT-AP313-IR
Страница 1: ...HD TVI Speed Dome User Manual ...
