User Manual of HD-TVI Speed Dome
29
3.4.6
Configuring Zone
Purpose:
A zone is a panning and tilting area defined by the left/right limits. You can configure the zones on
ZONES
submenu. You can define a zone when the targeted surveillance scene is limited.
Steps:
1.
Move the cursor to enter the zone configuration submenu:
MAIN MENU > DOME SETTINGS > ZONES
ZONES
ZONE NO. 1
<UNDEFINED>
EDIT ZONE
ZONE STATUS ON
SCAN STATUS ON
CLEAR ZONE
BACK EXIT
Figure 3-19
Zone Configuration
2.
Choose the zone number:
(1)
Move the cursor to
ZONE NO.
and click
IRIS+
button to enter the edit mode.
(2)
Click the up and down buttons to select the zone number to be configured.
(3)
Click
IRIS+
again to confirm the settings and exit edit mode of this column.
Up to 8 zones can be configured.
3.
Configure the zone area.
(1)
Move the cursor to
EDIT ZONE
and click
IRIS+
button to enter the
edit mode.
(2)
You can see
SET LEFT LIMIT
on the screen. Click the direction buttons to set the left limit.
(3)
Follow the prompts on the screen to set the right limit.
(4)
Click
IRIS+
button to save the settings and exit.
4.
Set the zone status and scan status.
ZONE STATUS:
The zone status just indicates the current status of the zone.
SCAN STATUS:
You can set the scan status to
ON/OFF
to enable/disable the scanning in the
zone.
ZONE STATUS
is not editable. After you edited the zone, it will switch to
ON
automatically;
if you delete the zone, the
ZONE STATUS
will switch to
OFF
.
5.
Clear the zone settings.
Move the cursor to
CLEAR ZONE
, click
IRIS+
to clear all the settings of the current zone, and click
IRIS+
again to confirm the settings and exit.
Содержание Winic RedLine CT-AP313-IR
Страница 1: ...HD TVI Speed Dome User Manual ...
