Cansonic UltraDuo Z1, Инструкция по эксплуатации

Страница: 14 / 36

• ATTACH THE MOUNT TO THE WINDSHIELD & START RECORDING
Remove the protective plastic film and select a location on the windshield to
put the suction cup in place.
Release the locking lever from the mount by pulling down on it. Hold the
suction cup in place with the mount and press against the window.
While holding it in place, put the release lever back to lock the mount.
TIP:
- When selecting a location for the suction cup, make sure it’s on smooth
glass free of paint.
- Before mounting, clean the area with a dry/clean cloth to allow a stronger
bond between the glass and the suction cup.
- Remember to place the mount within the area of the vehicle’s windshield
wipers.
• ADJUST THE ANGLE
Loose the locking ring and adjust the camera to the angle you want.
When you find the perfect angle, remember to tighten the ring again.
• CONNECT CAR POWER OUTLET
- Connect the power cable that is in the package to your vehicle’s cigarette
outlet.
- Plug the power cable into the camera to allow the camera to charge.
- The Cansonic UltraDuo Z1 will automatically turn on and start recording
once power has been made available from the cigarette outlet. Just start
the vehicle and start driving!
- If there is no cigarette outlet for your vehicle, use the included USB power
cord.
13