Cansonic UltraDuo Z1, Инструкция по эксплуатации

Страница: 15 / 36

TIP:
- Remember to plug the car power cord to the camera in the power socket
located on the top left corner.
- DO NOT wire the UltraDuo Z1 directly to the car cigarette outlet or any 12 V
outlet. Doing so will result in permanent damage to the camera.
- The Cansonic UltraDuo Z1 has a hardwire kit available from the Cansonic
official website that will directly connect to your vehicle’s fuse box. This will
allow you to have your cigarette outlet available for other use.
Please read carefully and follow the instructions below to help you operate
UltraDuo Z1 safely.
WARNING:
ALWAYS pay attention to the road ahead of you. Driving with distractions on
the road may result in penalties, accidents, or even death.
PLEASE DRIVE CAREFULLY.
Always place the mount in a location that will not obstruct the driver’s view of
the road. We recommend you place the mount behind the rearview mirror on
the passenger side, within the windshield wiping area.
CAM clearly needs to view through
DO NOT
place the camera in front of the driver’s side.
DO NOT
place the mount within the airbag deployment area or near any
mirrors.
DO NOT operate the UltraDuo Z1 while driving. Remember, the camera will
automatically record when the vehicle engine has started.
PLEASE place the camera where the power cable is easily concealed and
will not distract the driver. Avoid areas such as the steering wheel, pedals,
or gear shifter.
PLEASE remember to clean the area where the mount’s suction cup will be
placed.
PLEASE adjust your camera settings before you begin driving.
14