Cansonic UltraDuo Z1, Инструкция по эксплуатации

Страница: 13 / 36

CAMERA PARTS & CONTROL (CONT.)
18. Power Button
Press and hold the button for 2 seconds to turn the camera on/off.
19. Micro SD Card Slot
Insert you micro SD card here. Push your memory card into the slot until
you hear a click.
20. Reset Button
On the rare occasions the camera has a problem, use the reset button to
shut down the camera.
Simply press the reset until the camera turn offs and press power button
to turn on.
18 19 20
Follow the instructions below for the first time installation.
• INSERT YOUR Micro SD CARD IN THE UltraDuo Z1
The UltraDuo Z1 is fitted to allow a standard Micro SD card to record your
footage. Before installing, make sure the gold end of the card is facing the
LCD screen. Once it’s aligned with the slot, push the card in and wait for the
CLICK
to make sure it is secure.
TIP:
- If you cannot hear the CLICK , take a small coin by the edge and push on the
outside end of the card until the sound is made.
- Remember: DO NOT REMOVE OR INSERT THE MEMORY CARD WHILE
THE ULTRADUO Z1 IS TURNED ON.
• PLACE THE UltraDuo Z1 ON THE SUCTION MOUNT
When you attach the UltraDuo Z1 onto the mount, make sure you align the
camera within the mount clips for proper installation.
12
BOTTOM
IN-VEHICLE INSTALLATION