Cansec CP40, Руководство по установке

Страница: 22 / 43

CP40 Page 22 of 43
Installation Manual October 2015 • Rev. 2.7
12 VDC MAGNETIC LOCKS > 250MA (EXTERNAL POWER SUPPLY)
DC power, normally closed, fail secure.
* NOTE: A diode can cause slow release of the Maglock. It is better to use a MOV
device. Some Maglocks have build-in MOV devices, so no diode is required, check
with Maglock supplier.
IMPORTANT: In some jurisdictions, the use of a UL approved power
supply and connection to the fire alarm system for emergency release may
be required. Installers should contact the local authority having
jurisdiction to verify the specific requirements. Also, a building permit
may be required in some jurisdictions for the installation of magnetic
locks.