Canon Puncher Unit-L1, Процедура установки

Страница: 35 / 40

Chapter 1
27
When connecting the interface cable, be sure to turn off the host machine and disconnect its power plug from the
power outlet. Otherwise, you can suffer an electric shock.
F-1-78
<Saddle Finisher-R2/Saddle Finisher-T2>
1) Mount the front foot cover [1] using a screw [2] (RS tightening; M3x8).
2) Align the rear foot cover claw [3] with the rear cover and mount the rear foot cover [4] with a screw (tapping;
M4x12) [5].(The figure shows the Saddle Finisher-R2.)
F-1-79
3) Connect the finisher and the host machine with the interface cable.
When connecting the interface cable, be sure to turn off the host machine and disconnect its power plug. Otherwise,
you may suffer an electric shock.
<Saddle Finisher-R2>
Connect the finisher and the host machine with the interface cable [1]. Fit the cable clamp [2] to the host machine,
and route the interface cable [1] through it.
[1]
[5]
[4]
[3]
[1]
[2]