Canon Puncher Unit-L1, Процедура установки

Страница: 33 / 40

Chapter 1
25
5) End the installation work as instructed in "Work After Making Checks/Adjustments."
1.4.2
Work After Making Checks/Adjustments
0003-0212
<Finisher-Q1/Finisher-Q3/Finisher-R1/Finisher-T1>
1) If you removed the auxiliary ring, fit the left rear foot cover, adjust the length of the
auxiliary rail to suit the needs of the user, and mount it using 4 screws.
2) Mount the front cover to the finisher using 3 screws.
3) Mount the covers.
<Finisher-Q1/Finisher-Q3>
Mount the lower front extension cover [1] using a screw [2] (RS tightening; M3x8). Mount the front foot cover [3]
using a screw [2] (RS tightening; M3x8).
F-1-73
<Finisher-R1/Finisher-T1>
For the Finisher-T1, open the front cover.
Mount the front foot cover [1] using a screw [2] (RS tightening: M3x8).(The figure shows the Finisher-R1.)
F-1-74
4) Connect the finisher and the host machine using the interface cable [1].
When connecting the interface cable, be sure to turn off the host machine and disconnect its power plug from the
power outlet. Otherwise, you can suffer an electric shock.
<Finisher-Q1/Finisher-Q3/Finisher-T1>
[3]
[1]
[2]
[1]
[2]