Canon Puncher Unit-L1, Процедура установки

Страница: 13 / 40

Chapter 1
5
F-1-4
Before starting the work, be sure to go through the following on the host machine:
1. Turn off the control panel power switch.
2. Turn off the main power switch.
3. Disconnect the power cable (from the power outlet).
<When Installing the Finisher-Q3/Saddle Finisher-Q4 to an iR4570/3570/,2870/2270 Series Machine>
1. Side Paper Deck (See the Side Paper Deck Installation Procedure.)
2. Finisher [1], [2] (See the descriptions up to "Preparing for the Host Machine."
3. Installing the 3-Way Unit-A1 (See the 3-Way Unit-A1 Installation Procedure.)
4. Installing the Buffer Unit (See "Installing the Buffer Path Unit.")
5. Finisher extra tray [5] (See the Finisher Extra Tray Installation Procedure.)
6. Puncher unit [6] (See the Puncher Unit Installation Procedure.)
7. Connecting to the Host Machine (See "Connecting to the Host Machine" or the instructions under "Connecting to
the Host Machine" in the Puncher Unit Installation Procedure.
[6]
[5]
[4]
[1]
[2]
[3]