Canon PowerShot N2, Руководство пользователя

Страница: 122 / 140

122
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
P Mode
No AF frames are displayed and the camera does not focus when the
shutter ring is pressed halfway.
●
To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter ring
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
● Set the flash mode to [
] (
=
61).
●
Adjust brightness by using exposure compensation (
=
59).
●
Use spot metering (
=
59).
Subjects look too bright, highlights are washed-out.
● Set the flash mode to [
] (
=
42).
●
Adjust brightness by using exposure compensation (
=
59).
●
Use spot metering (
=
59).
●
Reduce the lighting on subjects.
Shots look too dark despite the flash firing (
=
36).
● Shoot within flash range (
=
134).
●
Increase the ISO speed (
=
60).
Subjects in flash shots look too bright, highlights are washed-out.
● Shoot within flash range (
=
134).
● Set the flash mode to [
] (
=
42).
White spots appear in flash shots.
● This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
●
Lower the ISO speed (
=
60).
Subjects are affected by red-eye.
●
Edit images using red-eye correction (
=
77).
Recording to the memory card takes too long, or continuous shooting is
slower.
●
Use the camera to perform low-level formatting of the memory card (
=
109).
Shooting
Cannot shoot.
●
In Playback mode (
=
63), press the [ ] button (
=
23).
Strange display on the screen under low light (
=
26).
Strange display on the screen when shooting.
●
Note that the following display problems are not recorded in still images but are
recorded in movies.
-
The screen may flicker and horizontal banding may appear under fluorescent
or LED lighting.
No date stamp is added to images.
●
Though this camera cannot add a date stamp to images, it can be added when
printing as follows.
- Printing using the software
See “Software Instruction Manual” (
=
114).
- Print using printer functions
[ ] is displayed when the shutter ring is pressed halfway (
=
36).
●
Set [IS Mode] to [Continuous] (
=
61).
● Set the flash mode to [
] (
=
61).
●
Increase the ISO speed (
=
60).
●
Mount the camera on a tripod or take other measures to keep it still. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (
=
61).
Shots are out of focus.
●
Press the shutter ring halfway to focus on subjects before pressing it all the way
down to shoot (
=
24).
●
Make sure subjects are within focusing range (
=
134).
●
Set [AF-assist Beam] to [On] (
=
50).
Shots are blurry.
●
Blurring may occur more often when Touch Shutter is used to shoot, depending
on shooting conditions. Hold the camera still when shooting.
Downloaded From camera-usermanual.com Canon Manuals