109
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
P Mode
Metric/Non-Metric Display
Change the unit of measurement shown in GPS elevation information
(
65) and elsewhere from m/cm to ft/in as needed.
●
Choose [Units], and then choose [ft/in].
Increasing Touch-Screen Panel Sensitivity
Sensitivity of the touch-screen panel can be increased, so that the camera
responds to a lighter touch.
●
Choose [Touch Response], and then
choose [High].
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing
is slower, continuous shooting is slower, or movie recording suddenly
stops. Low-level formatting erases all data on a memory card. Before low-
level formatting, copy images on the memory card to a computer, or take
other steps to back them up.
●
Touch the field to the left of [Low Level
Format] to select it (mark with a [
]).
●
Follow steps 2 – 3 in “Formatting Memory
Cards” (
formatting process.
●
Low-level formatting takes longer than “Formatting Memory
Cards” (
108), because data is erased from all storage regions
of the memory card.
●
You can cancel low-level formatting in progress by touching
[Stop]. In this case, all data will be erased, but the memory card
can be used normally.
