manualshive.com logo in svg

Canon OCT-A1, Руководство по эксплуатации

Поделиться
Скачать
Canon OCT-A1 Скачать руководство пользователя страница 266

266

Appendix

EMC (Electromagnetic Compatibility)

The OCT is designed and tested to comply with IEC 60601-1-2 (EN 60601-1-2), the 
applicable regulations regarding EMC for medical devices and needs to be installed and 
put into service according to the EMC information stated as follows.

If this equipment causes harmful interference to other devices, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

• 

Reorient or relocate the receiving device.

• 

Increase the separation between the equipment.

• 

Connect this device into an outlet on a circuit different from that to which the other 
devices are connected.

If the problem cannot be solved with the above measures, stop using this equipment 
and consult your sales representative or local Canon dealer.

Precautions on EMC

1.   Medical electrical equipment needs special precautions regarding EMC and needs 

to be installed and put into service according to the EMC information provided in the 
manual.

2.   Portable and mobile RF communications equipment can affect medical electrical 

equipment.

3.   Information regarding the cable affecting EMC is as follows: 

To maintain the optimum EMC performance, use only the designated cables.

Name

Type

Length

Remarks

AC Power Cord

Non-Shielded

3.0 m fixed-length

Supplied

Synchronous Cable

Shielded

Max. 2.0 m

Supplied

USB Cable

Type AB connector plug 
supporting USB 2.0 Hi-
Speed

Max. 2.0 m

Not supplied

Data Cable

Shielded

Max. 2.0 m

Not supplied

4.   The use of accessories, transducers and cables other than those specified, with the 

exception of transducers and cables sold by Canon sales representative or local 
Canon dealer as replacement parts for internal components, may result in increased 
emissions or decreased immunity of the OCT.

5.   The OCT should not be used adjacent to or stacked with other equipment; if adjacent 

or stacked use is necessary, the OCT should be observed to verify normal operation 
in the configuration in which it will be used.

6.   Essential Performance (against Electromagnetic Disturbances) 

Controlling Laser power or irradiation level of laser beam

7. Due to electromagnetic disturbances, it may be necessary for the customer or the 

user of the OCT to take the measurement again or to restart the equipment, the 
software or the computer.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   266

10/26/2020   10:50:11 AM

Содержание OCT-A1





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды