Canon OCT-A1 Скачать руководство пользователя страница 185

Страница: 185 / 276

7 Report

185

Editing Analysis Results for Areas

Click [Tools], and select [Area].

The [Edit Tools] screen appears.

Edit the analysis results for the area.

•

Moving nodes: Point the mouse cursor to a node and drag it to the desired position.

•

Deleting nodes: Point the mouse cursor to a node, right-click and select [Delete the
Node].

Click [OK].

The [Edit Tools] screen closes.

Deleting Analysis Results for an En Face Image

Click [Tools].

The [Edit Tools] screen appears.

Select the item you want to delete.

Select the analysis item you want to delete from [Distance] or [Area].

Delete the analysis results.

Point the mouse cursor to an analysis line, right-click and select [Delete Tool] from the
menu.

Click [OK].

The [Edit Tools] screen closes.

Information

If you select [Clear All] on the [Edit Tools] screen, all the analysis results are deleted.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 185

10/26/2020 10:50:00 AM

Содержание OCT-A1





















































































































































































































































































Результаты поиска

Содержание OCT-A1

Отзывы:

Бренды по названию

Популярные бренды

Canon OCT-A1, Руководство по эксплуатации

Результаты поиска

Содержание OCT-A1

Отзывы:

Бренды по названию

Популярные бренды