manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 35 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 35

Front View

(1)

 operation panel

Use to change the settings of the machine or to operate it.

Operation Panel

(2)

 ADF (Auto Document Feeder)

Load a document to copy, scan, or fax. The documents loaded in the document tray are scanned
automatically one sheet at a time.

Loading Documents in the ADF (Auto Document Feeder)

(3)

 document feeder cover

Open when clearing jammed documents.

(4)

 document guides

Adjust these guides to match the width of document in the ADF.

(5)

 document tray

Open to load a document in the ADF. You can load two or more sheets of document of the same
size and thickness. Load the document with the side you want to scan facing up.

(6)

 document output slot

Documents scanned from the ADF are delivered here.

(7)

 document cover

Open to load an original on the platen glass.

(8)

 paper output tray

Opens automatically when printing or copying starts and printed paper is ejected.

(9)

 output tray extension

Opens automatically when you open the paper output tray, and supports ejected paper.

(10)

 paper output support

Extend to support ejected paper.

(11)

 Wi-Fi lamp

Lights or flashes blue to indicate the wireless LAN status.
Lights:

Wireless LAN active

 is selected.

Flashes:

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов