manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 179 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 179

Encryption Method:

Select the encryption method used over the wireless LAN.
You can change WEP settings with selecting 

Use WEP

 and clicking 

Configuration...

.

Changing the WEP Detailed Settings

You can change WPA or WPA2 settings with selecting 

Use WPA

 or 

Use WPA2

 and clicking

Configuration...

.

Changing the WPA or WPA2 Detailed Settings

Important

If all encryption types of the access point, printer, or computer do not match, the printer

cannot communicate with the computer. If the printer cannot communicate with the
computer after the encryption type of the printer was switched, make sure that encryption
types for the computer and the access point matches that set to the printer.

If you connect to a network that is not protected with security measures, there is a risk of

disclosing data such as your personal information to a third party.

TCP/IP Setup:

Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your
network environment.

6.

Click 

OK

.

After changing configuration, a screen is displayed asking you for confirmation before the
settings are sent to the printer. If you click 

Yes

, the settings are sent to the printer and the

Transmitted Settings

 screen is displayed.

Note

Changing the network settings with the USB cable temporarily may switch the default

printer. In this case, reset 

Set as Default Printer

.

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов