manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 211 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 211

Note

The two types of access control (i.e., by MAC address and by IP address) can be enabled

at the same time.
An access control type is enabled as long as the Enable printer access control check box is
selected, regardless of the type currently displayed by selecting in 

Printer Access Control

Type:

.

When both access control types are enabled at the same time, a computer or a network

device whose address is registered to either list will be allowed access to the printer.

2.

Accessible IP Addresses:

Shows the registered IP addresses and any comments.

3.

Edit...

The 

Edit Accessible IP Address

 screen is displayed to edit the settings selected in 

Accessible

IP Addresses:

.

Edit Accessible IP Address Screen/Add Accessible IP Address Screen

4.

Add...

The 

Add Accessible IP Address

 screen is displayed to register the IP address of a computer or

a network device from which to access the printer over the network.

Important

Add the IP address of all computers or network devices within the network from which to

access the printer. The printer cannot be accessed from a computer or a network device that
is not on the list.

Up to 16 IP addresses can be registered. IP addresses specified by Range Specification

are counted as one address. Use Range Specification when you intend to register 17 or
more IP addresses.

5.

Delete

Deletes the selected IP address from the list.

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов