Canon MX720 Series Скачать руководство пользователя страница 196

Страница: 196 / 248

Wireless LAN Sheet

Note

This screen is not available depending on the printer you are using.

Allows you to set the printer with wireless LAN connection.
To display the

Wireless LAN

sheet, click the

Wireless LAN

tab on the

Configuration

screen.

Network Type:

Infrastructure

Connects the printer to the wireless LAN with an access point.

SSID:

The SSID of the wireless LAN is displayed.
As the initial settings, the unique value is displayed.

Note

Enter the same SSID that the access point is configured to use. The SSID is case-

sensitive.

Search...

The

Search

screen is displayed to select an access point to connect to.

Search Screen

Note

When IJ Network Tool runs over a LAN, the button is grayed out and cannot be selected.

Connect the printer and the computer with a USB cable temporarily to change the settings.

Encryption Method:

Select the encryption method used over the wireless LAN.

Do not use

Select to disable encryption.

Use WEP

Transmission is encrypted using a WEP key you specified.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 196 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: