Canon MX720 Series Скачать руководство пользователя страница 198

Страница: 198 / 248

Search Screen

Note

This screen is not available depending on the printer you are using.

The access points detected are listed.

Detected Access Points:

The signal strength from the access point, encryption type, name of access point, and the radio
channel can be confirmed.

Important

If you connect to a network that is not protected with security measures, there is a risk of

disclosing data such as your personal information to a third party.

Note

Signal strength is displayed as follows.

: Good
: Fair
: Poor

Type of encryption is displayed as follows.

Blank: No encryption

WEP

: WEP is set

WPA

: WPA is set

WPA2

: WPA2 is set

Update

Click to update the list of access points when your target access point is not detected.
If the target access point is set to the stealth mode, click

Cancel

to return to the previous screen

and enter the access point's Service Set Identifier in

SSID:

on the

Wireless LAN

sheet.

Wireless LAN Sheet

Note

When detecting your target access point, make sure that the access point is turned on.

Set

Click to set the access point's SSID in

SSID:

on the

Wireless LAN

sheet.

Note

The

WEP Details

screen, the

WPA Details

screen, or the

WPA2 Details

screen appears if

the selected access point is encrypted. In this case, configure the details to use the same
encryption settings set to the access point.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 198 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: