Canon MX720 Series Скачать руководство пользователя страница 44

Страница: 44 / 248

Turning the Machine On and Off

Turning on the machine

Press the

button to turn on the machine.

The lamp on the

COPY

button flashes and then remains lit blue.

Confirming that the Power Is On

Note

It may take a while for the machine to start printing immediately after you turn on the machine.
If the

Alarm

lamp lights up or flashes orange and an error message is displayed on the LCD,

see A Message Is Displayed.

Turning off the machine

Press the

button to turn off the machine.

When the lamp on the selected mode button (e.g., the

COPY

button) or

MENU

button stops flashing,

the machine is turned off after all the lamps on the operation panel go out.

Important

When you unplug the power cord after turning off the machine, be sure to confirm that all the

lamps on the operation panel are off.

Notice for Unplugging the Power Cord

Note

The machine cannot send or receive faxes when the power is turned off.
The power cannot be turned off while the machine is sending or receiving a fax, or when unsent

faxes are stored in the machine's memory.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 44 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: