Canon MX720 Series Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 248

Canon MX720 Series Скачать руководство пользователя страница 107

Cleaning the Print Head Deeply

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean
the print head deeply only when necessary.

You need to prepare: a sheet of A4 or Letter-sized plain paper

1.

Make sure that the power is turned on.

2.

Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in
the cassette (lower).

3.

Open the paper output tray.

(1)

Holding both sides of the paper output tray, gently open it.

The output tray extension will open automatically when the paper output tray is opened.

(2)

Extend the paper output support.

4.

Clean the print head deeply.

(1)

Press the

MENU

button.

(2)

Select

Setup

, then press the

OK

button.

LCD and Operation Panel

The setup menu screen will appear.

(3)

Select

Maintenance

, then press the

OK

button.

The

Maintenance

screen will appear.

(4)

Select

Deep cleaning

, then press the

OK

button.

The confirmation screen will appear.

(5)

Select

Yes

, then press the

OK

button.

The machine starts cleaning the print head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the print
head. This takes about 2 minutes.
The pattern print confirmation screen will appear.

(6)

Select

Yes

, then press the

OK

button.

The nozzle check pattern will be printed.

(7)

When the completion message appears, press the

OK

button.

The screen will return to the

Maintenance

screen.

«
...
105
106
107
108
109
...
»

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов