Canon MX720 Series Скачать руководство пользователя страница 64

Страница: 64 / 248

(5)

Slide the paper guide

(B)

on the right to align the right and left guides with both

sides of the envelopes.

Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed
properly.

Note

Do not load envelopes higher than the load limit mark

(F)

Keep the envelope stack height below the protrusions

(G)

of the paper guides.

(6)

Insert the cassette (lower) into the machine.

Push the cassette (lower) into the machine until it stops.

Open the paper output tray.

(1)

Holding both sides of the paper output tray, gently open it.

The output tray extension opens automatically when the paper output tray is opened.

(2)

Extend the paper output support.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 64 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: